Sink. Monday , March 05th , 2018 - 13:49:38 PM
Next to fitting the sink is drilling holes: When the kitchen sink stainless steel is in place, mark the portions where the holes of the undermount sink needs to be drilled on the granite countertop. Take the silk undermount stainless steel out and use a drill to introduce holes in the marked spots.
Don’t wait too long before you clamp the sink: Place the 2 X 4 on the countertop across the sink and then clamp the sink, when clamping the sink, ensure one end goes through the sinks drain hole and the other end lands on the top of the wood plank.
So what about the size of the sink? The length of the problem is not to pay attention to, but the width is imperative, the width to refer to the width of the table, the standard table width of 55cm and 60cm two, but everything is special, the old house 50cm of the majority of the table. 55cm table width should be selected within 45cm, 60cm table width of the sink as long as no more than 50cm can be installed, but the 50cm table selection of the width of the sink is relatively narrow, the widest can not exceed 41cm, which It is very important.
Any content, trademark’s, or other material that might be found on the WebGuide website that is not WebGuide’s property remains the copyright of its respective owner/s. In no way does WebGuide claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.