Sink. Tuesday , October 17th , 2017 - 02:47:25 AM
The second step is to cut the hole: You can complete the other steps of installing the undermount sink yourself but you may also hire a professional to cut through the granite. The hole the professional will cut will be where you insert the sink.
If you are replacing an old sink or basin with a new one, it is usually much easier to saw off the old supply and waste pipes and the screws securing the fitting rather than trying to undo them. Loosening old, corroded fittings is at best frustrating and often impossible. Cut the pipes where they are easy to get at both at this stage and later when the new basin is installed. When the old fitting is off the wall, the taps can usually be removed comparatively easily if you want to use them again.
If the plunger does not clear the clog, try a sink auger. These devices can be purchased for about $20 each in any hardware store and can save you from having to call a plumber. Each device works a little bit differently, so be sure to follow the directions that come with the device.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does WebGuide claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.