Tina Solis. Sink. November 13th , 2017.
Do ensure the sink is sitting the correct position. Insert the wing nuts into the available screw heads: After the undermount sink has been clamped, insert the wing nuts into the available screw heads. When the screw nuts are inserted, ensure they are tight, if they are not tight, you can tighten them with your hands.
Turn on the water supply to the undermount sink and check if there are any leaks. I am sure if you had read this article from the beginning to the end, you will be able to install the kitchen steel stainless steel. I hope this article has been helpful on how to install undermount stainless steel.
Don’t wait too long before you clamp the sink: Place the 2 X 4 on the countertop across the sink and then clamp the sink, when clamping the sink, ensure one end goes through the sinks drain hole and the other end lands on the top of the wood plank.
Next to fitting the sink is drilling holes: When the kitchen sink stainless steel is in place, mark the portions where the holes of the undermount sink needs to be drilled on the granite countertop. Take the silk undermount stainless steel out and use a drill to introduce holes in the marked spots.
If the sink auger does not successfully unclog the sink, try using a chemical drain cleaner. Read the labels of the various drain cleaners if you have a septic tank, since only some cleaners are safe to use with a septic tank. Follow the instructions on the bottle.
Any content, trademark’s, or other material that might be found on the WebGuide website that is not WebGuide’s property remains the copyright of its respective owner/s. In no way does WebGuide claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.